Quiet ceilings with precise light: trimless and plaster-in downlights, low-glare spots, surface cylinders and panels by Nexia, for homes, hotels, restaurants and offices across the UAE and GCC.
The main Nexia ranges we supply for ceilings and walls. Each position is specified for output, beam, colour temperature and glare.
A trimless downlight with a three-step installation that leaves a clean edge without extra plaster work. Five colour finishes, IP20 or IP54, with an LED module or GU10.
Set into the ceiling and painted with it, so only the light remains. Round and square versions with a 110 mm cut-out.
Small high-output recessed modules with UGR below 13: the light is barely noticeable when you look up. Modules of one, two, five or ten, fixed or tilting 30°.
Downlights designed to blend into the ceiling, in four sizes and any RAL colour, with gold, copper and graphite coatings for more expressive interiors.
Low-profile downlights with a textured opal diffuser and switchable 2700K, 3000K or 4000K, for ceilings with little depth.
Cylinders and boxes mounted on the ceiling or hung on a cable, for concrete ceilings and spaces without a ceiling void.
596 × 596 mm ceiling panels for offices and meeting rooms, UGR below 19 in the microprismatic version, with tunable white options.
Aluminium wall lights for corridors, stairs and bedrooms, in RAL colours and gold, copper and graphite on selected families.
Replaceable LED modules and GU10 lamps for downlights that take a separate light source.
A starting point we refine in the lighting calculation for your plans.
| Space | Typical choice |
|---|---|
| Living room & bedroom | Warm 2700K–3000K, dim-to-warm, trimless or low-glare spots |
| Kitchen | 3000K, CRI 90 and above, wider beams over worktops and the island |
| Bathroom | IP54 versions near water, 2700K–3000K |
| Corridors & lobbies | Narrow beams to wash walls and light art, plaster-in finish |
| Restaurants & hotels | Low glare (UGR below 13), dim-to-warm, finishes matched to the design |
| Offices & meeting rooms | Panels and downlights with UGR below 19, 3000K–4000K |
| Concrete ceilings | Surface or suspended cylinders, no ceiling void needed |
Recessed light keeps the ceiling quiet and puts the light where it is needed: on the worktop, the wall or the art.



Photos: Nexia
Send your floor and ceiling plans. We calculate the light levels for each room, place the fixtures on the plan and send a luminaire schedule with quantities and prices. The calculation is free when you order the lighting through DOMA.
A downlight installed without a visible ring: the edge is finished into the ceiling, so only the opening and the light remain. Plaster-in versions are skimmed over and painted together with the ceiling.
It is a glare rating so low that the light source is barely noticeable when you look at the ceiling. It is used in restaurants, hotels and homes where visual comfort matters most. Offices usually need UGR below 19.
As the light is dimmed, its colour shifts from about 3000K to a candle-like 1800K, like a traditional lamp. It suits bedrooms, restaurants and hotel rooms.
Yes, in IP54 versions. Tidy, Tolva and other ranges are available with IP54 protection; your electrical contractor confirms the right protection for each position.
Use compact downlights with minimal recess height, or surface and suspended cylinders that need no ceiling void.
Lighting from Europe is shipped by air and reaches Dubai in up to 5 days. Production time for each item is confirmed in the quotation.
Page updated November 2026
We come back with a downlight layout, a luminaire schedule with prices and delivery dates.